UH-40CI - 65*20*25 - 40KG - BJVP Internal Gear Pump
Overview:
There are two basic designs of gear pump: external and internal
(Figure 1). An external gear pump consists of two identical,
interlocking gears supported by separate shafts. An internal gear
pump operates on the same principle but the two interlocking gears
are of different sizes with one rotating inside the other. The
larger gear (the rotor) is an internal gear i.e. it has the teeth
projecting on the inside.
Application:
Lubricants, Fuel Oil, Grease, Asphalt, Bitumen,
Gluse,Polymer,Resin,Chemical Fiber, Coatings, Detergents, High
viscosity product or high temperature product.
Parameters:
| Port size | 0.5”-10” |
| Capacity | 0.01～363 m3/h |
| Pressure range | 0.1～16 Bar |
| Temperature | -85～430℃ |
| Viscosity | 0.1～440, 000 cSt |
| Material | D.I ,WCB,304SS,316SS,316L,Duplex SS |
| Port Type | ASME or DIN Flanges ,NPT ,SAE ports |
Character:
Adjustable clearance, easy satisfied with the changable viscosity
;Enlarged seal chamber for multi type seal interchange ; Enlarged
bearing housing for quickly maintenance.
Available Solution:
Packing seal,Mechanical Seal,Cartridge type seal , all kinds of
seal types are interchangeable, enlarged bearing housing design for
future replacement and quickly maintenance.
Magnetic None Seal pump is also available.
Internal Safety valve , heating jacket,electric heating rod can be
supplied.
BJVP can provide a variety of material selection,working scope to
meet with application requirement.
Picture:
