5D Elbows - Simplified Pipe Networks - Pipeline Pigging System -
BJVP
Overview:
BJVP automated pipeline pigging system uses a logic-driven,
PLC-based control system to operate an electric-drive feed
mechanism to launch most types of pipeline pigs at pre-set launch
intervals. Quick-opening closure options and other design features
make launching and receiving pipeline pigs safe and easy.
Characteristics:
The following functions can be realized through Pigging
- Increase yields
- Minimum product loss
- Reduce flush waste
- Save time and money
- Reduce contamination risks, free of residual
- Changeable lips of pig can minimize the cost of consumer.
- Simplified pipe networks and reduced space.
Parameters:
| Product Catalogue | 5D elbows Pig Pigging line Pig Stop T-way valve Three-way distribution valve Electric cabinet Control System Launcher Receiver |
| Pipe Size | 1.5”~8” |
| Pressure Standard | ANSI 150# |
| Liquid Temperature | -52～380℃ |
| Liquid Viscosity | 0.1～440,000 cst |
| Material | WCB,CF8,CF8M,Alloy |
| Port Type | ASME B16.5 RF |
Pictures:
Applications:
- Chemical product
- Pier location product
- Manual & automatic control
- Pigging relevant accessories.
F&Q:
Q1: What can pigging system do in pipeline?
A: BJVP Pigging System can use the pig to clean the pipe line.
There is no redidue and contamination between the different kind of
liquid sharing the same pipe.
Q2: What is pigging equipment?
A: BJVP pigging equipment includes items such as high finishing
pipe Pigging System, pig launcher/ receiver, middle station, pig
detectors, pig, etc.
Q3: Where can this pigging system be used?
A: BJVP pigging equipment can be widely used in Lubricants and
greases, paints and varnishes, special chemicals, perfumes and
other industry applications.
Q4: How do pigs clean the pipelines?
A: Pig is pushed by forced air from the launcher to receiver, so
the product and any residues in pipeline will be pushed out of the
pipeline by pig.
